Features
¨ Well waterproof and dustproof features (IP65)
¨ Actuator is insulated well to valve body and the ambient
¨ Quick and easy replacement of moving actuator
¨ Actuator can be installed after plumbing work completed, which makes for more efficient on-site installation
¨ Valve may approach the wall to mount
¨ Valve can be operated by general tools when actuator has been removed
¨ Actuator installation allows for 2 different wiring orientations thus providing ease of wiring and service
¨ Differential pressure up to 150psi,is suitable for HVAC systems with sudden high head pressure with sudden high head pressure
¨ There has no sediment at the valve bottom due to direct flow passage of valve
¨ Soft shut-off and open, to eliminate water hammer in most applications
¨ Motor doesn’t bear any forces when valve is not in motion extending service life
Technical Data
¨ Media: chilled or hot water, 60% glycol
¨ Size: 1/2〞,3/4〞 & 1〞
¨ Flow Characterize: 2-way or 3 ways
¨ Operating Mode: 3-point control 924VAC0 or on/off
¨ Power supply: AC110V AC220V, AC230V, AC24V etc.
¨ Power Consumption: 5W (during valve position change)
¨ Running Time: 15sec.(50Hz)/12 sec.(60Hz)
¨ Pipe Fitting: NPT internal thread
Optional: BSPP external thread
BSPP internal thread
BSPT internal thread
Compression external thread
¨ Materials:
Body: forged brass, nickel plated
Optional: forged brass
casting bronze
stainless steel
Ball: chrome plated brass
optional stainless steel
Stem: brass
optional: nickel plated brass
stainless steel
Seats: fiberglass reinforced Teflon PTFE
Seal: 2 EPDM O-rings, lubricated
¨ Pressure Rating : 300psi (2MPa)
¨ Media Temp.Range: 34℉ to 203℉ (1℃ to 95℃)
¨ Max. Differential Pressure: 150psi (1MPa)
¨ Protection Grade: IP65
¨ Servicing: maintenance free
¨ Types: 2-way Valve, 3-way Valve (side), 3-way Valve (base)
